Sterling 442124-0 Installationsanleitung PDF herunterladen (Seite 5)

2. Install the Lavatory

Apply six self-adhesive pads along the top surface of the

pedestal.

Mark the pedestal centerline on the ﬂoor.

CAUTION: Risk of personal injury or product damage. This

pedestal lavatory is heavy. Get help lifting and moving it.

Position the pedestal on the ﬂoor centerline. Refer to the

roughing-in information for correct placement.

Carefully lift the lavatory into place on the pedestal. Level the

lavatory and add additional self-adhesive pads as needed to level.

If the bottom of the lavatory contacts the pedestal, reposition the

self-adhesive pads as needed. Make sure the lavatory ﬁts ﬂat

against the ﬁnished wall.

Refer to the roughing-in information to ensure the correct

distance between the pedestal and the wall.

Mark the two lavatory anchoring holes on the ﬁnished wall.

Mark the pedestal anchoring hole on the ﬂoor through the hole in

the pedestal bottom.

Carefully remove the lavatory from the pedestal.

Carefully move the pedestal and lavatory away from the

installation area.

Drill 3/16″ holes at the marked locations on the ﬁnished wall and

ﬂoor.

Position Six Self-Adhesive

Pads to the Top of the Pedestal.

The drain and

faucet are not

shown to

improve clarity.

The pedestal

height is reduced

to improve clarity.

Washer

Cap Nuts

Hanger Bolt

Pedestal

Lag Bolt

Washer

Sterling 5 1019859-2-B

1 2 3 4 5 6 7 8 9 10 ... 23 24

Keine Kommentare

Sterling 442124-0 Installationsanleitung Seite 5